By Veriquality Source:
Garment Inspection is a common task in garment manufacturing. Do you like to know how garment inspection is done in right procedure?
The garment inspection without the right procedure will cost much time and overlooking defects is very common. An effective inspection procedure would help you to increase the quality of the inspection job as well as productivity on this task.
In this article, a standard method of garment checking has been explained step by step. The standard method we called Clockwise Garment Inspection Method.
Why inspection the garment need clockwise?
1.All garment areas areinspected.
2.Systematic inspection prorocedure.
3.No repetition.
4.Improved quality levels.
5.Increased efficiency.
6.Chances of overlooking defects are reduced.
7. Minimizes garment handling.
Clockwise direction as shown in the following figure.
1. Firstly, holding the garment at shoulder points and exmine the front and back of the garment.
2. Lay the garment flat on the table and check the details.
3. Open and check center front opening
4. Inspect inside and outside of collar and neck. Check inside shoulder seams.
5. Fold top forward at shoulders. Examine back neck.
6. Check the tension of the neck seam. Stretch out to full extent.
7.Inspect left shoulder seam. Inspect left armhole seam.
8. Fold left sleeve across the front of the garment. Inspect left back armhole. Check for shading.
9. Inspect left sleeve cuff outside and inside. Check the tension of the left cuff seam. Stretch out to full extent.
10. Inspect the left underarm. Inspect the left side seam.
11. Check the tension of the left underarm seam. Check the tension of left side seam.
12. Inspect bottom outside and inside, front and back.
13. Check the tension of the bottom hem. Stretch out the bottom to a full extent.
14. Inspect right side seam. Inspect right underarm.
15.Check the tension of the right side seam. Check the tension of right underarm seam
16. Inspect right sleeve cuff outside and inside. Check the tension of right sleeve cuff. Stretch out to full extent.
17. Fold right sleeve across the front of the garment. Inspect right back armhole. Check for shading.
18. Inspect right armhole seam. Inspect right shoulder seam.
19. Turn garment over. Lay garment flat on the audit table. Examine style details and examine uncheck seam on the back.
20. Turn garment inside out. Lay garment flat on the audit table. Inspect for obvious defects. Examine unchecked seams on the inside.
